Our SV-S75-0 is a 110 Volt, 3/4”, 2 Way Stainless Steel Solenoid Valve is suitable for water, gas, air, weak acids, alkali, glycol and other low viscosity fluids. This particular valve is also food grade and suitable for potable water making it a great valve for industrial setting food and beverage systems. The Viton seal in this valve is capable of handling media as high as 250°F and as low as 15°F making it a great general purpose valve. This is normally closed meaning the valve is closed without power and opens when power is applied. The 110 volt coil is compatible with common residential 120 volt systems.
The SV-S75-0 is our most popular Stainless Steel valve because it can be directly installed in most water treatment applications. The coil is 110 Volts AC with a tolerance of +/- 10% making it perfect for 120 Volt AC power systems. The coil has a 5.5” wire connection that can be connected by soldering it, using terminal connectors or common wire nuts. The valve is rated for 100% duty but not indefinitely. A normally closed valve should never be installed as a fail-safe in the event of a power failure because the coil will burn out over time.
The valves lead free stainless steel body and components are ideal for installations where a lead free valve is required. This includes potable water applications, industrial food preparation and manufacturing settings. This valve will conform to NSF61 but does not have NSF certifications in place.
Installation: The valve has no polarity making power and ground interchangeable. There is an arrow indicating the direction of flow on the stainless valve body. Coil up is the preferred mounting direction but if necessary it can be installed in any position. An inline filter is recommended to keep debris from impeding on the flow and seal.